Revision 2

#9803Store at -20C

Cell Signaling Technology

Orders: 877-616-CELL (2355) [email protected]

Support: 877-678-TECH (8324)

Web: [email protected] cellsignal.com

3 Trask LaneDanversMassachusetts01923USA
For Research Use Only. Not for Use in Diagnostic Procedures.
:

:

:

:

Product Information

Product Usage Information

1. If buffer will be continually used, it is recommended that the 10x buffer be kept at 4°C for 1-2 weeks. For longer periods of time, buffer should be stored at –20°C. Aliquoting of 10x buffer is recommended if many small experiments are to be performed.

2. Thaw 10x buffer at 24-30°C, mixing end-over-end.

3. Dilute 10X Cell Lysis Buffer to a 1X solution using ddH2O. This product supplies enough 10X material to make 150mls of whole cell extract.

4. Chill 1X buffer on ice and add PMSF just prior to use.

Note: CST recommends adding 1 mM PMSF immediately before use.

Lysis:

For lysis of adherent cells, we recommend the following: (all reagents and lysates must be kept cold)

1. Treat cells as desired.

2. Wash plate with PBS to remove residual media.

3. Add 400 µL of 1x lysis buffer/ 10 cm dish.

4. Incubate plate on ice for 5 minutes.

5. Scrape cells.

6. Sonicate briefly.

7. Spin extract 10 minutes at 14,000 x g in a cold microfuge.

8. Remove supernatant for use.

Additional notes:

1. For non-adherent cells, add 400 µl of buffer per 107 cells once they have been washed in 1X PBS and pelleted.

2. 2X #9803 Cell Lysis Buffer can be used for lysis of tissue samples, although a homogenization step is recommended after adding lysis buffer. Extract the tissue at a

ratio of 100 mg of tissue to 1 ml of buffer. Sonication of the tissue lysate is also required.

3. Additional protease inhibitors can be added to the 1x lysis buffer without any difficulties.

Solutions and Reagents

20 mM Tris-HCl (pH 7.5), 150 mM NaCl, 1 mM Na2EDTA, 1 mM EGTA, 1% Triton, 2.5 mM sodium pyrophosphate, 1 mM beta-glycerophosphate, 1 mM Na3VO4, 1 µg/ml leupeptinNote: CST recommends adding 1 mM PMSF immediately before use.

Storage

This product is stable for 24 months when stored at -20°C. Cell Lysis Buffer can be stored at 4°C for a short period of time (1-2 weeks).

Product Description

Cell Lysis Buffer is used to lyse cells under nondenaturing conditions.

Species Reactivity

Species reactivity is determined by testing in at least one approved application (e.g., western blot).

Cross-Reactivity Key

H: human M: mouse R: rat Hm: hamster Mk: monkey Vir: virus Mi: mink C: chicken Dm: D. melanogaster X: Xenopus Z: zebrafish B: bovine Dg: dog Pg: pig Sc: S. cerevisiae Ce: C. elegans Hr: horse GP: Guinea Pig Rab: rabbit All: all species expected

Trademarks and Patents

Cell Signaling Technology is a trademark of Cell Signaling Technology, Inc.
All other trademarks are the property of their respective owners. Visit cellsignal.com/trademarks for more information.

使用に関する制限

法的な権限を与えられたCSTの担当者が署名した書面によって別途明示的に合意された場合を除き、 CST、その関連会社または代理店が提供する製品には以下の条件が適用されます。お客様が定める条件でここに定められた条件に含まれるものを超えるもの、 または、ここに定められた条件と異なるものは、法的な権限を与えられたCSTの担当者が別途書面にて受諾した場合を除き、拒絶され、 いかなる効力も効果も有しません。

研究専用 (For Research Use Only) またはこれに類似する表示がされた製品は、 いかなる目的についても FDA または外国もしくは国内のその他の規制機関により承認、認可または許可を受けていません。 お客様は製品を診断もしくは治療目的で使用してはならず、また、製品に表示された内容に違反する方法で使用してはなりません。 CST が販売または使用許諾する製品は、エンドユーザーであるお客様に対し、使途を研究および開発のみに限定して提供されるものです。 診断、予防もしくは治療目的で製品を使用することまたは製品を再販売 (単独であるか他の製品等の一部であるかを問いません) もしくはその他の商業的利用の目的で購入することについては、CST から別途許諾を得る必要があります。 お客様は以下の事項を遵守しなければなりません。(a) CST の製品 (単独であるか他の資材と一緒であるかを問いません) を販売、使用許諾、貸与、寄付もしくはその他の態様で第三者に譲渡したり使用させたりしてはなりません。また、商用の製品を製造するために CST の製品を使用してはなりません。(b) 複製、改変、リバースエンジニアリング、逆コンパイル、 分解または他の方法により製品の構造または技術を解明しようとしてはなりません。また、 CST の製品またはサービスと競合する製品またはサービスを開発する目的で CST の製品を使用してはなりません。(c) CST の製品の商標、商号、ロゴ、特許または著作権に関する通知または表示を除去したり改変したりしてはなりません。(d) CST の製品をCST 製品販売条件(CST’s Product Terms of Sale) および該当する書面のみに従って使用しなければなりません。(e) CST の製品に関連してお客様が使用する第三者の製品またはサービスに関する使用許諾条件、 サービス提供条件またはこれに類する合意事項を遵守しなければなりません。

Revision 2
#9803

Cell Lysis Buffer (10X)