ただ今実施中のプロモーション | 詳細はこちら >>
12727
Immunofluorescence Application Solutions Kit
Buffers & Dyes
Buffer Kit

Immunofluorescence Application Solutions Kit #12727

Reviews ()
Citations (0)
Immunofluorescence Image 1: Immunofluorescence Application Solutions Kit

To Purchase # 12727S
製品番号 サイズ 価格 在庫
12727S
1 Kit  (100 tests)

Reagents Not Included

  1. Unconjugated or conjugated primary antibody.
  2. Fluorochrome-conjugated secondary antibody (if applicable).
  3. Methanol (if necessary).
  4. Antifade mounting reagent, such as ProLong® Gold Antifade Reagent (#9071), with DAPI (#8961).

NOTE: When using any primary or fluorochrome-conjugated secondary antibody for the first time, titrate the antibody to determine which dilution allows for the strongest specific signal with the least background for your sample.

Storage

All components in this kit are stable for at least 12 months when stored at the recommended temperature and left unused. Formaldehyde fixative should be used within one month once opened.Upon receipt, #12528 and #12606 should be stored at room temperature. #12411 and #12378 should be stored at 4°C.

Protocol

PRINT

View >Collapse >

Protocol Id:

Immunofluorescence Application Solutions Kit Protocol

NOTE: Please refer to the antibody data sheet to determine if it is validated and approved for use on cultured cell lines (IF-IC) or frozen tissue sections (IF-F) and for information regarding appropriate antibody dilution.

Some primary antibodies may require methanol fixation or permeabilization, which will be noted on the data sheet. Methanol is not included in this kit.

A. Solutions and Reagents

NOTE: The #12528, #12411, and #12378 buffers in this kit contain 0.05% sodium azide as a preservative. Peroxidase-based fluorescence assays may be negatively affected by sodium azide.

SUPPLIED REAGENTS

  1. Immunofluorescence Wash Buffer (10X): (#12528) Dilute to 1X Wash Buffer using reverse osmosis deionized (RODI) or equivalent grade water. Store at 4°C and use within one month once diluted.
  2. 16% Formaldehyde, Methanol-Free: (#12606) Use fresh, dilute to 4% with 1X Wash Buffer. Leftover diluted material should be discarded.

    NOTE: The screw cap allows for the entire vial contents to be used at once. To extend the product’s shelf-life, small volumes should be extracted by piercing the silicone top with a needle and syringe. Store protected from light and use within one month after opening.

  3. Immunofluorescence Blocking Buffer: (#12411) Contains goat serum as a protein blocker mixed with a mild detergent. Use as supplied and store at 4°C.
  4. Immunofluorescence Antibody Dilution Buffer: (#12378) Use as supplied and store at 4°C.

ADDITIONAL REAGENTS (NOT SUPPLIED)

  1. Unconjugated or conjugated primary antibody.
  2. Fluorochrome-conjugated secondary antibody (if applicable).

    NOTE: When using any primary or fluorochrome-conjugated secondary antibody for the first time, titrate the antibody to determine which dilution provides the strongest specific signal with the least background for your sample.

  3. Methanol (if necessary).
  4. Antifade mounting reagent, such as ProLong® Gold Antifade Reagent (#9071) or ProLong® Gold Antifade Reagent with DAPI (#8961).

B. Specimen Preparation

  1. Cultured Cell Lines (IF-IC)

    NOTE: Cells should be cultured, treated, fixed, and stained directly in multi-well plates, chamber slides or on coverslips.

    1. Aspirate liquid and cover cells to a depth of 2–3 mm with 4% formaldehyde diluted in 1X Wash Buffer.

      NOTE: Formaldehyde is toxic, use only in fume hood.

      IMPORTANT: If noted on the primary antibody data sheet, use ice-cold 100% methanol in lieu of formaldehyde as the fixative.

    2. Allow cells to fix for 15 min at room temperature.
    3. Aspirate fixative, rinse three times with 1X Wash Buffer for 5 min each.
    4. Proceed with Immunostaining (Section C).
  2. Frozen/Cryostat Sections (IF-F)

    1. For fixed frozen tissue proceed with Immunostaining (Section C).
    2. For fresh, unfixed frozen tissue, please fix immediately, as follows:
      1. Cover sections with 4% formaldehyde diluted in 1X Wash Buffer.
      2. Allow sections to fix for 15 min at room temperature.
      3. Rinse slides three times with Wash Buffer for 5 min each.
      4. Proceed with Immunostaining (Section C).

C. Immunostaining

NOTE: Unless otherwise noted, all subsequent incubations should be carried out at room temperature in a humid light-tight box or covered dish/plate to prevent drying and fluorochrome fading. Do not allow slides to dry at any time during this process.

  1. Methanol Permeabilization Step (if applicable): Aspirate wash buffer and cover specimen to a depth of 3-5 mm with ice-cold 100% methanol. Incubate for 10 min at -20°C, and then rinse in 1X Wash Buffer for 5 min.

    NOTE: This step is only required if noted on the primary antibody data sheet.

  2. Block specimen in Blocking Buffer for 60 min at room temperature.
  3. While blocking, prepare primary antibody by diluting as indicated on data sheet in Antibody Dilution Buffer.
  4. Aspirate Blocking Buffer, apply diluted primary antibody.
  5. Incubate overnight at 4°C.
  6. Rinse three times with 1X Wash Buffer for 5 min each.

    NOTE: If using a fluorochrome-conjugated primary antibody, such as an Alexa Fluor® fluorochrome antibody, then skip to (Section C, Step 9).

  7. Incubate specimen in fluorochrome-conjugated secondary antibody diluted in Antibody Dilution Buffer for 1 hr at room temperature in the dark.
  8. Rinse three times with 1X Wash Buffer for 5 min each.
  9. Coverslip slides with antifade reagent, such as ProLong® Gold Antifade Reagent (#9071) or ProLong® Gold Antifade Reagent with DAPI (#8961).
  10. For best results, allow mountant to cure overnight at room temperature. For long-term storage, store slides flat at 4°C protected from light.

posted December 2017

Protocol Id: 1664

Product Description

The Immunofluorescence Application Solutions Kit is designed to conveniently provide the major supporting reagents needed for immunofluorescence in cell cultures (IF-IC) or frozen samples (IF-F). The reagents in this kit are thoroughly validated using our IF-approved antibodies and will perform optimally with the kit’s recommended protocol, ensuring accurate and reproducible results. This kit includes sufficient reagents for 100 assays based on a 100 µl assay volume.

IMPORTANT: Please refer to the antibody data sheet to determine if it is validated and approved for use on cultured cell lines (IF-IC) or frozen tissues sections (IF-F) and for information regarding appropriate antibody dilution.

Some primary antibodies may require methanol fixation or permeabilzation, which will be noted on the data sheet. Methanol is not included in this kit.

使用に関する制限

法的な権限を与えられたCSTの担当者が署名した書面によって別途明示的に合意された場合を除き、 CST、その関連会社または代理店が提供する製品には以下の条件が適用されます。お客様が定める条件でここに定められた条件に含まれるものを超えるもの、 または、ここに定められた条件と異なるものは、法的な権限を与えられたCSTの担当者が別途書面にて受諾した場合を除き、拒絶され、 いかなる効力も効果も有しません。

研究専用 (For Research Use Only) またはこれに類似する表示がされた製品は、 いかなる目的についても FDA または外国もしくは国内のその他の規制機関により承認、認可または許可を受けていません。 お客様は製品を診断もしくは治療目的で使用してはならず、また、製品に表示された内容に違反する方法で使用してはなりません。 CST が販売または使用許諾する製品は、エンドユーザーであるお客様に対し、使途を研究および開発のみに限定して提供されるものです。 診断、予防もしくは治療目的で製品を使用することまたは製品を再販売 (単独であるか他の製品等の一部であるかを問いません) もしくはその他の商業的利用の目的で購入することについては、CST から別途許諾を得る必要があります。 お客様は以下の事項を遵守しなければなりません。(a) CST の製品 (単独であるか他の資材と一緒であるかを問いません) を販売、使用許諾、貸与、寄付もしくはその他の態様で第三者に譲渡したり使用させたりしてはなりません。また、商用の製品を製造するために CST の製品を使用してはなりません。(b) 複製、改変、リバースエンジニアリング、逆コンパイル、 分解または他の方法により製品の構造または技術を解明しようとしてはなりません。また、 CST の製品またはサービスと競合する製品またはサービスを開発する目的で CST の製品を使用してはなりません。(c) CST の製品の商標、商号、ロゴ、特許または著作権に関する通知または表示を除去したり改変したりしてはなりません。(d) CST の製品をCST 製品販売条件(CST’s Product Terms of Sale) および該当する書面のみに従って使用しなければなりません。(e) CST の製品に関連してお客様が使用する第三者の製品またはサービスに関する使用許諾条件、 サービス提供条件またはこれに類する合意事項を遵守しなければなりません。

For Research Use Only. Not For Use In Diagnostic Procedures.
Cell Signaling Technology is a trademark of Cell Signaling Technology, Inc.
Alexa Fluor is a registered trademark of Life Technologies Corporation.
ProLong is a registered trademark of Life Technologies Corporation.
Triton is a trademark of The Dow Chemical Company.
Powered by Translations.com GlobalLink OneLink SoftwarePowered By OneLink